matriz

- Drop-forge hit to hit:

- 1 cutting press 2.000 x 3 mm (COLGAR)
- 1 cutting press 2.000 x 6 mm Mod. AG2004 (AMADA SCHIAVI)
- 1 setting digital equipament for cutting press 2.000x3 NC (COLGAR)
- 1 doble cutting press with variable angle 400x400x3 mm 70º-140º (ARMES)
- 1 digital positioning device for cutting press 2.000x5 COLGAR
- 1 mitering machine 300x300x3mm to 90º (FIM)

- 2 throat eccentric presses of 10Tm (MIOS)
- 2 throat eccentric presses of 20Tm (MIOS)
- 2 throat eccentric presses of 25Tm (GUILLEM)
- 2 throat eccentric presses of 40Tm (GUILLEM)
- 1 throat eccentric press of 60Tm (GUILLEM)
- 2 throat eccentric presses of 80Tm (GUILLEM)
- 2 throat eccentric presses of 125Tm (GUILLEM)
- 1 throat eccentric press of 200 Tm (DELTECO)
- 1 throat eccentric press of 250 Tm (DELTECO)

- 1 hydraulic press of 5Tm (ARMES)
- 1 hydraulic press of 10Tm (ARMES)
- 1 hydraulic press of 40Tm (ARMES)
- 1 throat hydraulic press of 30Tm (GALDABINI-GUILLEM)
- 1 throat hydraulic press of 40Tm (GALDABINI-GUILLEM)
- 2 throat hydraulic presses of 80Tm (GALDABINI-GUILLEM)
- 1 twin stud hydraulic press of 120 Tm (ARMES)
- 1 twin stud hydraulic press of 200Tm (ONA-PRES)
- 1 twin stud hydraulic press of 300Tm (ONA-PRES)

- 1 air press 0-3.500kg (IBEROMARK)
- 1 air press 0-7.500kg (IBEROMARK)

- 1 press type ANVIL HORN of 60Tm (GUILLEM)
- 1 gag press 100x1,5mm (GOTI)
- 1 gag press 200x3mm (SARONNI)
- Air cylinders, beetles, …

- Forging Press Lines (FPL):

- 1 automatic FPL of 160Tm (COPRESS-G.P.A.-ARMES-LASA)
- 1 automatic FPL of 160Tm (GUILLEM-SARONNI)
- 1 speedy automatic FPL of 22Tm (PERKINS-GOTI)
- 1 speedy automatic FPL of 32Tm (PERKINS-GOTI)
- 1 sppedy automatic FPL of 40Tm (GUILLEM)
- 3 automatic FPL of 80Tm (GUILLEM-G.P.A.)
- 1 twin stud automatic FPL of 80Tm (DELTECO-G.P.A.-GOTI)
- 1 twin stud automatic FPL of 80Tm (G.P.A.-GUILLEM)
- 1 twin stud automatic FPL of 125Tm (GUILLEM-SARONNI-ARMESA-LASA)

- Welding and finishings:

Welding:

- 1 arc welding robot (ABB)
- 1 hydraulic folding machine of 30Tm 1.250mm (AJIAL-COLLY)
- 1 hydraulic folding machine of 50Tm 2.000mm (AJIAL-COLLY)
- 1 spotwelder 6KVA (AGUILA)
- 6 spotwelders 12 KVA (AGUILA)
- 1 spotwelder 24KVA AGUILA
- 1 automatic spotwelder 30KVA (ARO)
- 1 short-arc bolt welding (TRW-NELSON)

- 1 welding press 40KVA (ARO)
- 1 welding press 180KVA (SERRA)
- 1 welding press 212KVA (SERRA)

- 2 gun bolt welders (KADE)
- 4 seam welders (KADE)
- 1 TIG welder (KADE)

- 1 screw machine up to M6 (ROSCAMATIC)
- 1 screw machine up to M14 (ROSCAMATIC)

- 1 screw transfer up to M8 (ACME)
- 1 screw transfer up to M8, double head (ACME)

- 1 drill, up to Æ10mm (ARAMON)

- 1 automatic tube bender up to 40mm diameter

- 3 jigsaw machines, with horizontal cutting group (OMERA)
- 1 jigsaw machine, with 2 horizontal cutting groups and
- 1 vertical group (INHER) Grinding machine Cutting-off machine

Finishings:

- 1 shiver machine RÖSLER model R420 EC-KF, with sieve to remove pieces/abrasives Æ25mm, with 2 velocities engine (RÖSLER)
- 1 shiver dryer by heat with automatic docker (UDYMATIC)
- 1 degreaser machine by ultrasounds (FISA)

- Quality control department

- 1 calibration standard boxes set (47 boxes) (MITUTOYO)
- 1 calibrated shanks set (PRECICONTROL)
- 1 gage rod set (MEYER-USA)
- 1 exterior micrometer (digital) (SONY)
- 1 dynamometer (EDIME BOT ARENAS)
- 1 profile projector (SHADOMASTER)
- 1 durometer (HOYTOM)
- 1 granite marble (1.200x800x150) (WENZEL PRAZISION)
- 1 angle set (90º-150º-120º)
- 1 proving ring Æ25 (EVEC)
- 1 dishing tester TACY 1 thickness gager (0-50m) (NEO-DERM)
- 1 thckness gager (0-1.250m) (ECCOMETER)
- 1 microscope (20x) (NIKON)
- 1 pocket microscope (8x) (MITUTOYO)
- 1 slide caliper (MITUTOYO)
- 1 depth gager (150m/m) (MITUTOYO)
- 2 protractors (MITUTOYO)
- 25 scale callipers (MITUTOYO-TESA-MAUSER-SYLVAC)
- 2 comparator holding tables (MITUTOYO-EXPORT)
- 1 micrometer holder
- 1 smooth control plate (150x100) (MITUTOYO)
- 2 control plates (MITUTOYO)
- 1 bevel blade (150x70) (MITUTOYO)
- 1 measurement column Capax 2.000 (MAUSER)
- 1 height gager (MITUTOYO)
- 10 comparation clocks (MITUTOYO-KOLER)
- 8 exterior micrometers (MITUTOYO-TESA)
- 2 exterior micrometers with hemispheric contact (HITEC)
- 1 exterior micrometers with sharp shape contact (HITEC)
- 1 index dial PI-250 (MECA)